Simple plumbing issues can not only hurt the image of your home but they can destroy your wallet. Simple things from clogged drains, to more advanced leaks can be incredibly destructive. Don’t fret however! With a few essential tips for the do it yourself home plumber, you will be ready to take care of any issue.
Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.
If your pipes make squeaking and hammering noises, it may be very simple to fix. Anchor any easily-accessible loose pipes. You are going to need a professional if the pipes will be located in the ceiling, walls, or the floors.
Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.
To help you repair a leaky water line, you should hire a plumber. A leaky water line can be a problem because it could lead to a flood. The best way to fix this problem is to hire a licensed plumber who is trained to repair the leak.
Make sure you know where your home’s water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.
Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.
Be careful about using liquid clog cleaners. These liquids can contain chemicals that are extremely bad for your pipes. Instead, use a snake or a plunger to dislodge any clogs you might encounter. Be sure to try these things before giving up and calling a plumber, who will probably re-perform those same acts.
In cold climate areas, sometimes the pipes in the plumbing system freeze. You can thaw them out without calling a plumber. Before beginning this process, open the faucet and begin thawing closest to the faucet and then move down the line as sections thaw out. One method you can use is to wrap the pipe with a heavy towel or burlap and then pour hot water over it, set a bucket underneath to catch the water.
You can remove unsightly mineral buildup from your shower head by soaking it in vinegar overnight. This loosens the deposits, and in the morning you only need to wipe off the residue with a rag. If your shower head is high up an not removable, place vinegar in a plastic bag, slip the bag over the shower head and hold in place with a twist tie.
If you find yourself needing a plumber, don’t hire one until you have checked out his or her credentials. Some plumbers aren’t experienced or skilled enough to do certain jobs, which makes the problem worse. Check reviews, and ask your friends and family for recommendations.
Check with the Department of Consumer Affairs when shopping for a good plumbing contractor. They provide many useful services, such as the ability to file a service complaint review complaints, and confirm that they are licensed. You don’t want to hire anyone who is not in good standing and has an expired, or non-existent, license.
To prevent the most common kitchen sink clogs, avoid putting any sort of solid foods down your drain. Many foods, such as eggs and vegetable and fruit waste actually harden with exposure to cold water and over time can form clogs that are next to impossible to remove without professional help.
If you have an ice maker or other plumbing going to your refrigerator, every six months or so pull the refrigerator away from the wall and inspect this plumbing. There should be no condensation or corrosion on these plumbing lines, if there is, contact a plumber and have them look at it.
When it comes to plumbing, there is never an unsolvable problem. If you feel yourself becoming frustrated with the project, you should try to take a break from what you are working on. The greatest mistakes start to happen when you become angry and inpatient, so take a break and walk outside.
One of the most inexpensive plumbing issues is a running toilet. Simply by understanding how a toilet actually functions is the first best tool in avoiding a running toilet. If you understand the function of the lever and floater, you will be able to fix any running toilet in no time.
Plumbing can be an advanced, highly technical profession where more often than not, you need an experts help. However, sometimes that is not the case and there are some simple do it yourself home fixes. If you take a little time to read about them you will find some of the most common plumbing problems are able to be handled by the common man.