If you know absolutely nothing about plumbing and are just dreading a day when the pipes in your home may burst, you need to read this article, which contains numerous tips that will both inform you and ease your mind. Read on for a comprehensive list of solid plumbing advice.
If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.
Routinely check your appliance connections and faucets around the house for any kind of obvious leaks or nearby signs of moisture. Not only do even the smallest leaks lead to a large waste of water and money, they also can lead to damage to your home or even the development of harmful molds.
If your sink is letting rusty water out and it will not drain, it is mostly likely because of the biological scum and grease that is built up in the pipes. You need to have your drains professionally cleaned, allowing maximum flow through your drains. Your drains must be open completely.
Make sure everyone in your home knows where the main water shut off valve is and that they know how to work it. That way, if there is a water problem, anyone in your household can turn off the water, thereby reducing the chances that your home will incur major water damage.
Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.
For clogged pipes, unblock them with a cleaner that is enzyme based. A enzyme-based cleaner will remove the clog by turning it into a liquid, freeing it from the drain. The best options on the market now are enzyme cleaners.
Before embarking on a plumbing project, make sure that you’re aware of where the shutoff valve for water in your home is, as well as the valves for shutting off individual structures like sinks, toilets, etc. This way, if something goes wrong, you’ll be able to stop the water flow.
Be careful with putting household cleaners in your toilet. They can cause the toilet to malfunction. The debris that these cleaners leave can sit in your toilet’s pipes and harden, making them almost impossible to get rid of. If it does harden, it usually requires the help of a professional.
If you are having trouble removing clean out plugs, there are a couple ways in which to resolve this. A hammer and chisel can be used to slacken the fitting. The only other thing you can do is chisel through it.
Look for online reviews to check out and help choose potential plumbers. Even if your insurer determines your plumber, you should go to their website and read any available consumer reviews to reinforce your faith in their abilities.
The most important plumbing tip you need to know is — how to turn off your home’s main water supply. Once the water is shut off, you can investigate problems and figure out how to resolve them. Walk the family through the house and show them where all the water shut-off valves are, and how to use them.
Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.
Make sure your plumbing contractor has the proper insurance before letting them work in your home. This is a big problem with all types of construction contractors. They may have the proper licenses, but because of the high cost of insurance, they may not be properly insured and can end up on your homeowners policy if they get hurt.
Take the time to ensure that everyone in your family knows how to cut off the water from the valve in your home. You’ll find a water meter right on it or near by. Water fixtures typically have a cut-off valve of their own. To prepare for an emergency, make sure that everyone in your family is familiar with the location of the valves. It also helps to mark the valves with arrows indicating the direction in which they should be turned to shut them off or turn them on.
If you have a leak and your water bill is going up, there is a method you can try before you call a professional. You can use the red-dye system to detect whether the leak is above ground, underground, or whether it has anything to do with the toilets.
When it comes to plumbing, there is never an unsolvable problem. If you feel yourself becoming frustrated with the project, you should try to take a break from what you are working on. The greatest mistakes start to happen when you become angry and inpatient, so take a break and walk outside.
Hopefully, now that you’ve read the above tips, the fine art of plumbing is a little less scary to you. Remember what you’ve learned here, so that you can put in practice when you need to. Also, remember that when all else fails, a plumber is just a speed dial number away.
Jefferson NC
