Home plumbing is a modern convenience! Indoor plumbing means you do not have to live by a creek or use an outhouse. However, keeping this luxury functioning – where and how you want – without drowning everyone in your home can be an interesting challenge! Read on for some advice on controlling the flow of water in your home.
Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.
When choosing a plumber make sure he is insured and licensed. This is very important. If there is a plumbing emergency, you want to make sure the plumber has met the training requirements of the state. If he is insured, this covers any accidental damage done while fixing your plumbing.
It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself.
Check how well your toilets are flushing. If the handle needs to be played with in order to keep the water from running constantly, or if it needs to be held down several times in order to flush, you may need to switch out some of the parts in your tank. This is not expensive, and it could help reduce your monthly water bill. It could also mean that you avoid the embarrassment of the flushing system breaking when you have visitors!
If you have a clogged toiled with a lower water lever, and the plunger isn’t working, try pouring in some warm water directly into the toilet. Once the water level gets low again, repeat the process.
Keep your bathtub in good shape by using a cup of baking soda and a cup of vinegar down its drain monthly. The combination will cause a chemical reaction, so just place a cloth or other object over the drain after pouring. After a few minutes,just flush the drain out with water that has reached a boiling point. Although this is useful for clearing away simple clogs made of hair and soap debris, it will not work for serious blockages.
If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.
Always buy a high quality fixture if you are going to replace your shower head. People often times incorrectly believe that it’s alright to buy a cheap shower head. While it may be cheap, chances are you will have to replace it sooner, as it’s more likely to break sooner.
If your sewer is backed up, there are things you can do to troubleshoot and clean, including renting equipment like a main line cable. However, often times this does not fully take care of the problem. A professional needs to assess the issue then, using a camera method, and thoroughly cleaning the main line.
Do not forget to check the temperature of the water heater in your house, especially if you are planning to leave for an extended period of time. You should keep the temperature no higher than 120 degrees, which will help to reduce energy use and prevent your system from burning out.
Teach kids how to shut off the toilet’s water supply. Kids are notorious for putting large wads of toilet paper and other things into the toilet, which inevitably leads to the toilet overflowing. Especially if your bathroom has carpet, show kids how to turn the water valve off if the toilet water keeps rising, to prevent the mess of an overflow.
Do not pour grease and oil down your drains. Cooking grease will build up in your pipes and could cause back-ups. Keep grease and oil in a container in your fridge and throw it in the trash when it is full. Avoid clogging your pipes with any products containing oil or grease.
To make your water heater work better, pick the right size. Knowing how many people and which appliances use the hot water will help you to learn what size tank is most suitable for your home.
You may want to consider tankless water heaters if you want to conserve water in your home. These kind of water heaters heat up your water as soon as it is being used, so you are not wasting energy on keeping your water hot when it is not being used.
While it might help to conserve a bit of water to not flush the toilet after every use or only under certain conditions, regularly flushing toilets can help keep water moving in pipes and prevent freezing. The same holds true for letting water run in sinks as well. If you have rarely used bathrooms in your home, make it point to to flush the toilets and run the faucets on a regular basis.
With a little bit of plumbing, you can route water anywhere you want in your home. Doing so, makes it possible to live anywhere and adds convenience to any room – but done wrong can mean a financial disaster! Keep the wisdom of this article in mind and you can keep the water flowing where you want but in ways you can handle.