Imagine taking on a plumbing project with the confidence that you are going to do a good job and that you are going to complete the job for well under the price of hiring professional help. Now use this hopefulness, and take a few minutes to read the great tips in this article.
You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.
Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.
Don’t pay a plumber midway through the job. You might have to put money down initially before the plumber begins the job. However, do not pay everything up front; instead, only pay once the job is successfully completed. Knowing the job was completed in a timely and high-quality manner is essential before paying for a plumber.
To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.
Making sure you know all of your problems so you can have them fixed by one plumber visit is very beneficial. Having them all fixed in one visit takes a lot of money off of your bill because you don’t have to pay for the visit multiple times so make sure you make a list first.
Do not put your hand in the garbage disposal to remove a clog. This can be potentially harmful. Always use tongs to get out whatever is stuck in the disposal. Using tongs is much safer, and you will make sure your hand does not get cut on the disposer’s sharp blades.
To limit toilet problems, don’t use it as a trash can. Don’t flush anything that is unlikely to dissolve and wind up clogging pipes, such as diapers, tissues, paper towels and cotton balls. Additionally, use the minimum amount of toilet paper required to clean up after you are done.
When changing your shower head, replace it with one of good quality. It’s common to think it’s fine to buy the one that is the cheapest. Cheap shower heads are not well-made and are very likely to break. Buying a cheap shower head will end up costing you more money over the long-term.
DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.
Enzyme based pipe cleaners work really well at unclogging your pipes. These cleaners turn the sludge into a liquid using natural bacteria, and then the liquid flows out of the pipes. The enzyme cleaners are the best on the market.
Avoid pouring grease or oil down your kitchen sink drain. Grease and oil can build up in your pipes and cause a backup. Instead, wait for the grease or oil to cool and solidify and either throw it away or see if there’s a place to recycle it near your home.
Many people wonder where the fruit flies are coming from. Each plumbing fixture has a self-sealed reserve that holds about two cups of water. If those pipes are broken or do not seal off, then odors and residue can cause fruit flies. It is recommended before anything to clean your pipes using bleach. If the flies come back, contact a professional.
If you need to hire a plumber, make sure you check them out before you give them the job. Some plumbers just don’t know how to handle certain tasks which could make the problem worse. Research reviews on the plumbers in your area, or ask family or friends about their recommendations.
In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. It is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.
Plumbing should only be done by professionals if there is a major problem or if you do not understand plumbing. Many of the big problems that plumbers deal with, actually have simple solutions. The average person, who does not understand the intricacies of plumbing, usually end up compounding the problem by causing other costly damage to the house during the failed repair. The plumber will need to be called in the end, anyway.
To summarize, you want to know that you are taking care of your plumbing job just the same as a professional would, but without the additional costs they would inflict upon you. Hopefully, this article was informative enough for you to tackle any plumbing issue that might come your way.