Imagine taking on a plumbing project with the confidence that you are going to do a good job and that you are going to complete the job for well under the price of hiring professional help. Now use this hopefulness, and take a few minutes to read the great tips in this article.
Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.
Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.
Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people’s mistakes can make the difference of saving or losing money.
As the weather begins to get cold, attend to all of your exposed pipes by adding insulation to them. Pay particular attention to pipes located in crawl spaces and the outside walls of your residence. Taking this step will help ensure that your pipes continue to function throughout the winter.
Look closely at your toilets several times throughout the year. Check to see if there are any leaks that you may not have noticed; you can do this by placing five or six drops of food coloring in the tank. If there is a leak, the color will seep into the bowl within half an hour. This process will help you catch a small problem before it gets too out of control.
Avoid the bursting of pipes due to the change in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls.
If you have bad water pressure in the shower, the showerhead might be clogged. Take a plastic baggie, fill it with regular vinegar, and tie it to the showerhead so that the showerhead is covered. Leave it overnight. In the morning, take the baggie off and use a small toothbrush to scrub away any mineral deposits.
During the winter, preventing frozen pipes when you live in a small dwelling can be something good to know. Frozen pipes will not only stop your flow of water but can crack and damage pipes. By running a little water out of every faucet during the coldest parts of the day, you can avoid this.
Check to make sure that overflow holes are not clogged up. Overflow holes exist to act as a double check in case of an overfilling sink. That may seem unimportant – but it will become a problem if they are clogged. Clear the overflow holes periodically when you are doing your periodic checks for other problems and things that need to be repaired.
Sometimes low pressure in water lines can be fixed just by cleaning sediment out of the aerator. After removing the aerator, disassemble it, and use a small brush that’s been dipped in vinegar to clean it. Rinse it and put it back on the faucet. Your water pressure should improve because the obstructing particles or buildup have been removed.
One of the ways that you can improve the functionality of your shower head is to clean the mineral deposits from the surface. Unscrew your shower head and soak it in vinegar overnight. In the morning, brush off the deposits with a toothbrush to help the flow of water for your showers.
If you find that your pipes have frozen during the cold winter months open all the faucets in your home. This lowers the water pressure for when the pipes thaw and the water is freely flowing again. Make sure to open all the faucets not just those that are frequently used.
To lessen the amount of hair going into your home plumbing, thoroughly brush hair and use a body brush to remove loose body hair before entering the shower or bath. If it’s been a while since you have shaved your legs or face, use an electric razor to remove the longer hair, before shaving in the sink or shower.
To summarize, you want to know that you are taking care of your plumbing job just the same as a professional would, but without the additional costs they would inflict upon you. Hopefully, this article was informative enough for you to tackle any plumbing issue that might come your way.
Hiddenite NC
